DA series 15 Gauge 34 degree Finish Nails for Senco, Hitachi, Porter Cable, Max, etc

FastenerUSA 15 gauge 34 degree DA series finish nails are available in five different grades of corrosion resistance including Brite (Non-Galvanized), Electro Galvanized, Hardened Galvanized, 304 Grade Stainless Steel, and 316 Grade Stainless Steel:

Brite (Non-Galvanized) 15 gauge finish nails are best suited for interior trim applications only. No corrosion resistance. Not recommended for ACQ Treated Lumber.

Electro Galvanized finish nails are best suited for interior trim applications and light exterior outdoor projects where corrosion is not a concern. Electro Galvanization provides a very thin layer of zinc coating with a measure of protection against the elements. Over time these nails may corrode with prolonged exposure to the elements. Not recommended for ACQ Treated Lumber.

Hardened Galvanized 34 degree 15 gauge finish nails are made specifically for attaching trim to metal studs in interior trim applications and light exterior outdoor projects where corrosion is not a concern. Electro Galvanization provides a very thin layer of zinc coating with a measure of protection against the elements. Over time these nails may corrode with prolonged exposure to the elements. Not recommended for ACQ Treated Lumber.

304 Grade Stainless Steel 15 gauge finish nails are best suited for typical outdoor applications to avoid nail corrosion and discoloration. ACQ-treated lumber, redwood, cedar, and acidic or oil-based exotic woods.

316 Grade Stainless Steel finish nails are best suited for tropical, seaside, salt water contact applications, or any project near large bodies of water. Recommended for all outdoor applications with ACQ-treated lumber, redwood, cedar, and acidic or oil-based exotic woods where Marine Grade fasteners are needed to avoid unsightly stains, streaks, corrosion and discoloration.

34 degree 15 gauge finish nails are commonly used for interior applications such as moulding and decorative trimming, casing, baseboards, wood furniture, and picture frame assembly, while galvanized nails are suitable for both interior and exterior applications. To avoid rusting and discoloration for outdoor projects and applications involving ACQ-treated lumber, cedar, redwood, and oil or acid-based exotic woods, we recommend our 304 grade stainless steel finish nails.

Buy 316 Grade Stainless Steel for seaside, salt water contact applications, or any project near large bodies of water. Marine grade stainless is often used with ACQ pressure treated lumber, cedar, redwood, and acidic or oil based exotic woods.

We also carry PDA series (PDA stands for Paslode DeWalt Angle) 16 gauge 20 degree angle finish nails as well as brads and micro pins for more delicate woodworking projects. If you need any assistance on choosing the right nail for your project, simply consult with our experts here at FastenerUSA.