#14 x 3-1/4" Square Drive Flat-Head S/D Screw w/Wings 410SS 1,000ct | F14C325FDB

(0)No Reviews yet
$740.95
SKU: F14C325FDB
PACKAGING QTY: 1,000 count
Warning: California Residents.
Products may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. https://www.p65warnings.ca.gov/

Details

Self-Drilling Flat-Head Screw with Wings F14C325FDB


These Self-Drilling Flat-Head Screw with Wings are 3 1/4" length, #14 thread diameter, 20 threads per inch with a #4 drill point, #3 square drive with .468" head diameter. 410 STAINLESS STEEL. Each box contains 1,000 screws.

Features:
• Flat countersunk head with self-countersinking nibs
• #3 square drive
• Machine screw thread, threaded full length
• Shank slot enhances thread formation in steel and removes exhaust
• Wings above drill point provide clearance hole in work piece so it won’t climb up the shank, then break off as point engages the steel substrate
• 2 1?2" length for 2x wood; 2" length for 1" and 5?4" boards
• Type 410 stainless steel is coated for additional corrosion protection

410 Stainless Steel can be hardened through heat treatment, giving it the ability to drill through metal. It does not offer the same level of corrosion resistance of either Type 316 or 305 stainless steel.

WARNING: Hardened stainless-steel fasteners should not be used with steel framing in environments with high humidity, condensation or other moisture that will be present at the dissimilar-metal interface.

Applications Include:
Fastening wood, plywood and fiber cement to steel – up to 0.209" thick.

Ratings & Reviews

No reviews available

Be the first to Write a Review