#10 x 3/4" STAR DRIVE FPH Flat Pan-Head Screws Clear-Zinc 5,000ct | FPH34B1018-5K

FPH Flat Pan-Head Screws FPHSD34B1016-5K

The FPH Flat Pan-Head screw is designed specifically for precision steel roll-forming technology (dimpled steel stud fastening), offered by manufacturers such as FRAMECAD®, Howick, Arkitech, Pinnacle Structures and Scottsdale Construction Systems.

The screw’s sharp point and tight thread design provide instant starts and consistent holding power. The FPH Flat Pan-Head screw comes in bulk, 5,000-count boxes.

Features:
• Sharp point for fast starts in prepunched steel framing.
• Deeper, stronger flat pan-head fits flush within the dimpled steel studs.
• 18 threads per inch.
• Recommended for steel thicknesses between 20 and 22 gauge.
• 6-lobe recess for more secure driving.

Benefits:
• Aligns with prepunched holes.
• Eliminates stripping in light-gauge steel.
• Deep T20 6-lobe recess results in less driver bit wear.
• Screw head sits flush in the dimples made by the forming machines, allowing for sheathing products to sit flat on the wall. It also allows for easy stacking of walls where screw heads do not catch on each other.

Applications Features:
• Precision steel roll-forming technology (dimpled steel stud fastening) as offered by such manufacturers as FRAMECAD, Howick, Arkitech, Pinnacle Structures and Scottsdale Construction Systems.

Product Information:
• Coating/Material: Clear Zinc Coating
• Screw Size: #10
• Length (in.): 3/4
• Head Diameter (in.): 0.340
• Drive Type: T20 6-Lobe (Star Drive)
• Head Type: Flat Pan Head
• Thread Type: Tapping Threads
• Threads Per Inch (TPI): 18
• Point Type: Sharp Point
• Packaging Quantity: 5,000

Product includes:
• Driver bit in each box (replacement bit model BIT20T-2-R2)

Clear-Zinc is an Electroplated clear zinc is applied in accordance with ASTM F1941. In the ASTM B117 salt spray test, clear zinc provides 36 hours of protection before the first appearance of red rust.