#6-20 x 1-1/4" Phillips Bugle Head Self-Drilling Drywall Screws Zinc CR3+ Plated 8,000ct | D614Z

Strong-Point #6-20 x 1-1/4" Phillips Bugle Head Self-Drilling Drywall Screws Zinc CR3+ Plated

Strong-Point #6-20 x 1-1/4" Phillips Bugle Head Self-Drilling Drywall Screws are designed for attaching gypsum board, insulation, and wood to metal studs. The bugle head design helps prevent tearing of drywall paper while providing a clean, professional finish. The #2 self-drilling point delivers fast, consistent drilling through steel thicknesses from .035" to .090". Zinc CR3+ plating provides corrosion protection by forming a protective barrier that helps prevent oxidation.

• #2 self-drilling point for light gauge steel applications
• Bugle head design reduces drywall paper tear-out
• Designed for attaching gypsum board to steel studs
• Suitable for gypsum, insulation, and wood-to-metal applications
• Zinc CR3+ plated for corrosion resistance
• Engineered for dependable drilling and fastening performance

• Head Type: Bugle Head
• Drive Type: Phillips
• Thread Diameter: #6
• Threads Per Inch: 20
• Length: 1-1/4"
• Point: #2 Self-Drilling
• Quantity: 8,000 pcs
• Weight: 32lb

• Attaches gypsum, insulation, and wood to metal
• Drill Capacity: .035" – .090"
• Recommended Drill Speed: 2500 RPM

• ICC-ES Evaluation Report: ESR-3528
• Meets ASTM C1513 for cold-formed steel framing connections
• Meets F.I.P.-1000.7 for torsional strength & drill speed
• Meets SAE J78 for performance & dimensional specifications
• Meets ASTM C954 for attaching gypsum board to steel studs
• Zinc CR3+ Plated

• Coating: Clear Zinc
• Salt Spray: 24 hrs.
• Kesternich: N/A
• Application: Used indoors for dry, non-corrosive environments
• Clear Zinc is an electrically applied plating that forms a protective barrier to prevent oxidation of the steel.