3/8" DIVERGENT LEG X 20GA GALV A11/T50 STAPLES 100,000ct | 86506C20

Spotnails 86506, Replacement staples for Rapid® A11/Arrow® T50, Divergent Point

Please be sure to verify stapler compatibility before ordering. 

Arrow T50 series is a proprietary crown which will fit only Arrow T50 series and similar staplers.

PLEASE NOTE **The labeling of the crown size is subject to interpretation by the manufacturer. Some manufacturers label as 7/16" crown while others label as 3/8" crown. The T50 / A11 staple is a proprietary crown size. These staples are made according to T50 and A11 (R11) specifications and will fit T50 and similar staplers.**

Features:

• For Use In: Spotnails: 85000 to 3/8", PSA1116, BSA1116AF, JSA1116; Senco: H Slap Hammer, PC0705; Duo-Fast: Slapshot; Bostitch: PHT150C, TR200, TR100, TRE500;Fasco: F1A A11-16 Auto L/M, F1B A11-16 Auto L/M, T-R11; Arrow: T-50,HT-55, HT-50, ETG50BN, ETF50PBN, T50PBN; Rapid: 54, A-11, R-11; Interchange: ICB-A11
• Electro Galvanized
• Low corrosion resistance

Details:

• Collation: Glue
• Gauge: 20
• Crown: 3/8"**
• Length: 3/8"
• Point: Divergent
• Quantity: 20 boxes of 5,000 pcs per box [total 100,000 pcs]
• Weight: 32 pounds [approx.]

Specifications:

• Meets ASTM F1667
• Electro Galvanized

Electro Galvanized steel provides a very thin layer of coating with a measure of protection against the elements. Over time these fasteners may corrode. Not recommended for ACQ Treated Lumber.