0.22" x 5" SDW EWP-PLY Structural Wood Screws E-Coat 50ct | SDW22500-R50

E-Coat SDW EWP-PLY Screws SDW22500-R50

These screws are 5" length (1 9/16" thread length), 0.22" diameter, T40 6-Lobe star drive. E-Coat. The Strong-Drive® SDW EWP-Ply screw is a high-strength structural wood screw specifically designed for fastening multi-ply wood members, such as engineered-wood products and solid-sawn lumber. The SDW EWP-Ply installs easily with no pre-drilling and is available in optimized lengths for fastening 1 3/4" engineered lumber, such as structural composite lumber (SCL). The large, flush head eases the handling of assembled girders and simplifies the installation of finishes or structural connectors. Each box contains 50 screws.

Features:
• Large washer head provides maximum bearing area; stamped with the Simpson Strong-Tie "≠" sign and fastener length for easy identification after installationbr>• Deep 6-lobe recess reduces cam-out, making driving easier
• Low-profile head results in less interference after installation; makes stacking and sliding members easier and allows installation of hardware and finishes to be virtually flush
• Optimal screw lengths provide maximum penetration while preventing the point from protruding out the back of the member
• Specific thread lengths avoids jacking
• Higher shear values than competitive products enable wider spacing saving time and money
• Bold thread design provides superior holding power and cinches fastened members together for consistent installation
• Patented 4CUT™ point ensures fast starts, reduced installation torque and eliminates the need for pre-drilling in most applications
• 50pc and mini-bulk packs include one deep, 6-lobe, T-40 driver bit; bulk packs include two driver bits

Codes/Standards: IAPMO-UES ER-192; City of L.A. RR25906

Technical installation data

E-Coat is an Electrocoating which utilizes electrical current to deposit the coating material on the fastener. After application, the coating is cured in an oven. Electrocoating provides a minimum amount of corrosion protection and is intended for dry, non-corrosive applications only.

Applications Include:
Multi-Ply Wood Members, Engineered-Lumber Products and Solid-Sawn Lumber. Typical screw application is 1 3/4" plies of structural-composite lumber or double 3x2 parallel-chord trusses.