Fast Free Shipping
Expedited shipping rates available online
Free Shipping in the USA to all 50 states! No minimums!
Items 1-12 of 20
Our Full Round Head 21 Degree Plastic Strip Framing Nails fit all 20-22 degree framing nailers and are available in five different grades of corrosion resistance including Brite (Non-Galvanized), Electro Galvanized, ASTM A153-D Hot Dip Galvanized, 304 Grade Stainless Steel, and 316 Grade Stainless Steel:
Brite (Non-Galvanized) is best suited for interior, non-exposure applications where corrosion is not a factor. No corrosion resistance. Not recommended for ACQ Treated Lumber.
Electro Galvanized is best suited for interior applications and light exterior outdoor projects where corrosion is not a concern. Electro Galvanization provides a very thin layer of zinc coating with a measure of protection against the elements. Over time these nails may corrode with prolonged exposure to the elements. Not recommended for ACQ Treated Lumber.
ASTM A153-D Hot Dip Galvanized meets and/or exceeds the United States standard for Hot Dip Zinc Mass Coating of ASTM A153 class D Fasteners. HDG grade nails are first cut to length and heads formed from a large spool of brite steel wire rod. Then nails are Hot Dipped into Molten Zinc until a thick uniform coating is achieved across the entire surface of the nail. Next, the nails are either packaged in bulk or collated together into strips or coils. Our HDG Nails meet and or exceed the ASTM A153 Class D Fastener specification. Meets the minimum requirement for ACQ Treated Lumber but is Not Recommended. For ACQ Treated lumber we recommend Stainless Steel.
304 Grade Stainless Steel is best suited for typical outdoor applications to avoid nail corrosion and discoloration. ACQ-treated lumber, redwood, cedar, and acidic or oil-based exotic woods.
316 Grade Stainless Steel is best suited for tropical, seaside, salt water contact applications, or any project near large bodies of water. Recommended for all outdoor applications with ACQ-treated lumber, redwood, cedar, and acidic or oil-based exotic woods where Marine Grade fasteners are needed to avoid unsightly stains, streaks, corrosion and discoloration.
Choose from our wide selection of 20-22 degree plastic strip nails for roof sheathing work and other construction jobs such as framing, decking, fencing, truss building, subflooring, side wall sheathing and pallets and crate assembly. Our 20-22 degree plastic strip framing nails come in a variety of gauge diameters and shank types to suit your needs. Now you can use the right kind of nails for whatever construction or home improvement project you're working on. Using the correct type of nails is essential to any project.
For roof sheathing, you can use FastenerUSA's vinyl coated 2 3/8 x .113 (12 gauge) smooth shank brite steel nails to fasten your sheathing to the roof frame. . No matter what sheathing material you use, our plastic strip framing nails can fasten your plywood or OSB properly and provide it with some much needed durability. Each JobPak contains approximately 2,500 nails. To make sure that it's going to last, don't make the common mistake of using too few fasteners during roof sheathing attachment. Be sure to inquire with local building authorities for fastening pattern code requirements.
Our 20-22 degree plastic strip framing nails have full round heads recommended for avoiding head pull-through situations. It is also compatible with most 20-22 degree angle framing nailers in the market so you don't have to spend more on your tools.
For smaller construction jobs such as fencing and box and crate assembly, you can use our 2” x .113 (12 gauge) ring shank 304 grade stainless steel nails that come in a MiniPak containing approximately 250 nails. Ideal for outdoor applications due to its anti-corrosive and discoloration properties, the ring shank or annual thread of these nails offer superior holding power to prevent nails from backing out over time. It is also recommended for working with ACQ treated lumber, cedar, and redwood.
We also carry 20-22 degree plastic strip framing nails for projects near large bodies of water or locations that may have seaside and saltwater contact. You don’t have to worry about unsightly stains, streaks, corrosion and discoloration if you use FastenerUSA’s 3 1/4" x .131 (10 gauge) ring shank 316 Marine grade stainless steel nails. These nails are suited for extreme environment projects and when working with acidic or oil based exotic woods.
You may contact us toll free at (877) 593-2723 to learn more about our different 20-22 degree plastic collated framing nails or browse our website to view our full product line. We ship free anywhere in the USA with 3-5 delivery days and we don’t have a minimum order requirement. Our trained staff will be happy to accommodate you or answer your inquires about our 20-22 degree plastic nails.