1/4" x 3-7/16" Storm-Panel Screws 302SS 25pc Kit | SPS25344-KT
Details
Storm-Panel Screws SPS25344-KT
These Storm-Panel Screws are 3 7/16" length , 1/4" thread diameter, Hex drive. 302 STAINLESS STEEL.
Features:
• Save time and money with a single installation
•The screw is made of Type 302 stainless steel for corrosion resistance
Each pack contains:
• (25) Stainless-steel storm-panel screws 1/4" x 3 7/16"
• (25) 1/4" zinc die-cast washered wing nuts
• (25) White plastic caps to protect threads after panels are removed
• (1) Hex driver bit for panel screw
• (1) 0.234" x 4 1/2" carbide-tipped drill bit
Installation:
1. Drill a hole in the concrete or masonry base material using the drill bit provided. To pre-drill into wood, use a 3/16" bit.
2. Position the panel and drive the screw using the hex driver bit (included). Drive the screw deep enough so that the bottom of the threads for the wing nut are slightly below the surface of the panel.
3. Secure the panel with the wing nut.
4. To remove panels – remove the wing nut, remove the panel and cover the threads on the screw with the plastic cap.
302 Stainless Steel fasteners provide superior corrosion resistance.
Applications Include:
Attaching storm panels to wood, concrete and masonry