1/2" LEG x 20GA GALVANIZED A11/T50 STAPLES 80M Case
quantity: 16 boxes of 5,000ct
3-5 day delivery Nationwide
Similar to Arrow T50 #508 & Spotnails 85508
DOES NOT FIT OFFICE STAPLERS
Arrow T50 series is a proprietary crown size which will fit only Arrow T50 series and similar staplers.
These 1/2" length Electro Galvanized staples are 20 gauge. Made to fit Arrow T50, Rapid 11 and similar staplers. Electro Galvanized steel provides a very thin layer of coating with a measure of protection against the elements. Over time these staples may corrode. Not recommended for ACQ Treated Lumber. Each case contains 16 boxes of approximately 5,000 staples per box. 80,000 staples per case.
PLEASE NOTE **The labeling of the crown size is subject to interpretation by the manufacturer. Some manufacturers label as 7/16” crown while others label as 3/8” crown. The T50 / A11 staple is a proprietary crown size. These staples are made according to T50 and A11 (R11) specifications and will fit T50 and similar staplers.**
Insulation, vapor barriers, house wrap, roofing felt, display signs, low voltage wire.
Arrow T50 #508, B&C Eagle A11-12C , Bostitch BTA708, DeWalt DWHTTA7085C, Fasco EA1112, Grex GA11-12, Interchange A11-12 (30521), Josef Kihlberg JK671-12, Rapid 140 12mm (11912311), Spotnails 85508