FastenerUSA

Shop by Catagory

Collated Nails

  Finish Nails

   23ga. Micro Pins
   18ga. Brad Nails
   16ga. Angled Finish Nails
   16ga. Finish Nails
   15ga. Angled Finish Nails
   Finish T-Nails
   Stainless Steel Finish Nails

  Flooring Cleat Nails

   16 ga. L-Shaped Cleat Nails
   16 ga. T-Shaped Cleat Nails
   Stainless Steel Cleat Nails

  Coil Nails

   Brite Nails
   Cap Nails for Hitachi
   Class 1 Electro Galv Nails
   Electro Galv Nails
   Electro Galv Roofing Nails
   Hot Dip A153 Nails
   Hot Dip A153 Roofing Nails
   Stainless Steel Nails

  Stick Nails

   Brite Nails
   Electro Galv Nails
   Heavy Galv Tile Roof Nails
   Hot Dip A153 Nails
   Positive Placement Nails
   Stainless Steel Nails

Hand Drive Nails

 Copper Roofing Nails
 Stainless Steel Nails

  Cap Nails

   Masonry Round Cap Nails
   Metal Round Cap Nails
   Metal Square Cap Nails
   Plastic Round Cap Nails

Poly Sheeting

 Clear Visqueen 20' x 100'

Screws

  Stainless Steel Screws
  Woodworking Screws

Staples

 Staples Main
 Cap Staples for Bostitch
 Finish Staples
 Flooring Staples
 Stainless Steel Staples
 Upholstery Staples

Tools

 Air Compressors
 Cordless Nailers
 Electric Tools
 MAX Rebar Tiers
 Pneumatic Tools

Stainless Steel Nails. Stainless Steel Staples, Copper Slating Nails, Hot Dip galvanized nails, Finish Nails, MAX Rebar Tiers ...
     View CartUPS gound transit map
HACKER SAFE certified sites prevent over 99.9% of hacker crime.


Did you know that FastenerUSA offers professional "in-house" factory authorized repair services for  Max Rebar tiers? We accept RB213, RB392, RB395, RB515, RB650, RB650A, and RB655 models for repair. As a Certified ReBar Master Key Dealer we have the most up to date bulletins and technical equipment required to restore these tools to original factory specifications and settings. Due to our systematic approach and technical skill, we have earned a large base of very satisfied customers nationwide.

Our MAX RB technicians have been awarded high level certificates of service training from MAX USA Corp. Our MAX RB technicians have attended update/service training seminars from New York, NY to San Francisco, CA. Due to this extensive training FastenerUSA has made a name for itself in the MAX RB community.

We will take your tool through a systematic step by step process:

  1. notify customer upon arrival to our facility
  2. 360° visual inspection
  3. battery life inspection
  4. preliminary tie test
  5. complete teardown of all parts
  6. retrieve tool history through sub board circuit test
    (excludes models RB213 and RB392)
  7. complete internal diagnostic
  8. inspect all internal parts
  9. replace worn and/or damaged parts
  10. 100% internal parts cleaning
  11. regrease with new factory approved grease
  12. re-assemble and restore to original factory settings
  13. 100% external parts cleaning
  14. 30-40 tie minimum tie testing
  15. notify customer upon completion & arrange for shipping

FULLY INSURED GROUND SHIPPING IS FREE AFTER SERVICE!

To send your tool(s) in for repair:

  1. Ship tool(s) prepaid to FastenerUSA
                                        Attn: RB Service Dept
                                        909-B N. Emerald Ave
                                        Modesto, CA 95351
                                        (877) 593-2723
    *Insurance is recommended when shipping MAX ReBar Tiers
  2. Please include contact information inside the package.
    (name, phone number and/or email address)
  3. Please include comments regarding any malfunction(s) you are
    experiencing with your Max ReBar Tier.
  4. That's it! One of our RB Service Techs will contact you as soon as your tool arrives at our Service Department, notify you of it's safe delivery, and offer an estimated time of completion.

RUSH REPAIRS ARE AVAILABLE. HOWEVER, PLEASE NOTIFY US IN ADVANCE IF YOU ARE REQUIRING EXPEDITED SERVICE.

 

Buy Max ReBar tier and accessories here!


FastenerUSA.com

Contact Sales Dept.
sales@fastenerusa.com
Check Order Status
orders@fastenerusa.com
Customer Service
support@fastenerusa.com

Copyright ©2007,
Fastener USA Systems, Inc